How to Alter Tracksuit Bottoms
Are you tired of your tracksuit bottoms not fitting quite right? Maybe they’re too tight around the waist or too loose around the legs. Don’t worry; altering tracksuit bottoms is a simple and cost-effective solution. In this article, we’ll guide you through the process of how to alter tracksuit bottoms, so you can enjoy a comfortable and stylish fit.
Materials Needed
Before you start, gather the following materials:
– Scissors
– Measuring tape
– pins
– seam ripper (optional)
– thread and needle
– sewing machine (optional)
Step 1: Measure Your Tracksuit Bottoms
Take accurate measurements of your tracksuit bottoms, including the waist, hips, and inseam. This will help you determine how much you need to alter the garment.
Step 2: Decide What to Alter
Based on your measurements, decide whether you need to take in the waist, let out the hips, or adjust the inseam. You can also combine these alterations for a custom fit.
Step 3: Take In the Waist
If your tracksuit bottoms are too tight around the waist, follow these steps:
1. Mark the area where you want to take in the waist with a pin.
2. Use the seam ripper to remove the stitches from the waist seam.
3. Cut the fabric along the marked line, leaving a 1/2-inch seam allowance.
4. Pin the fabric together, overlapping the edges by the desired amount.
5. Sew the waist seam using a straight stitch, and then finish the edges with a zigzag stitch.
Step 4: Let Out the Hips
If your tracksuit bottoms are too tight around the hips, follow these steps:
1. Mark the area where you want to let out the hips with a pin.
2. Use the seam ripper to remove the stitches from the side seams.
3. Cut the fabric along the marked line, leaving a 1/2-inch seam allowance.
4. Pin the fabric together, overlapping the edges by the desired amount.
5. Sew the side seams using a straight stitch, and then finish the edges with a zigzag stitch.
Step 5: Adjust the Inseam
If you need to adjust the inseam, follow these steps:
1. Mark the area where you want to shorten or lengthen the inseam with a pin.
2. Use the seam ripper to remove the stitches from the inseam.
3. Cut the fabric along the marked line, leaving a 1/2-inch seam allowance.
4. Pin the fabric together, overlapping the edges by the desired amount.
5. Sew the inseam using a straight stitch, and then finish the edges with a zigzag stitch.
Step 6: Try on the Altered Tracksuit Bottoms
Once you’ve completed the alterations, try on the tracksuit bottoms to ensure they fit comfortably. Make any necessary adjustments and repeat the process until you’re satisfied with the fit.
Conclusion
Altering tracksuit bottoms is a straightforward process that can help you achieve a custom fit. By following these simple steps, you can easily make your tracksuit bottoms more comfortable and stylish. Happy sewing!
