How to Take in Alter Waist String Pant
Are you struggling with a pair of pants that are too tight around the waist? Don’t worry; you’re not alone. Many people face this common problem, and the good news is that it can be easily fixed. In this article, we will guide you through the process of taking in a waist string pant to achieve a comfortable fit. So, let’s dive right in and learn how to take in alter waist string pant.
Materials Needed
Before you start, gather the following materials:
1. Scissors
2. Measuring tape
3. Thread and needle
4. pins
Step 1: Measure the Waist
To determine how much you need to take in, measure the waist of the pants where you want to make the alteration. Make sure to measure it at the widest part of the waistband. Write down the measurement for reference.
Step 2: Mark the Seam Allowance
Using a fabric pen or a chalk pencil, mark the seam allowance on both sides of the waistband. The seam allowance is typically 1/2 inch (1.27 cm) on each side. This will help you know where to cut the fabric.
Step 3: Cut the Waistband
With the scissors, carefully cut the waistband along the marked seam allowance. Make sure to cut through both layers of fabric. You should now have two separate pieces of the waistband.
Step 4: Adjust the Width
To take in the waist, fold one of the waistband pieces in half, wrong sides together, and press with an iron. This will create a new, narrower waistband. Repeat this step for the other piece.
Step 5: Sew the New Waistband
Pin the two new waistband pieces together, right sides facing, and sew along the raw edges. Leave a small opening to turn the waistband right side out.
Step 6: Turn and Press
Turn the waistband right side out and press it with an iron to ensure a smooth finish.
Step 7: Attach the Waistband to the Pants
Pin the new waistband to the pants, matching the side seams and the waistline. Sew the waistband to the pants, using a zigzag stitch to prevent the fabric from fraying.
Step 8: Hem the Pants
Finally, hem the pants to the desired length. You can do this by folding the bottom edge of the pants up and sewing it in place.
And there you have it! You have successfully taken in your waist string pant. Follow these simple steps to achieve a comfortable and stylish fit. Remember, taking in a waistband is a common alteration, and with a little patience and practice, you’ll be able to do it like a pro. Happy sewing!
